Model	MD-X1020C*1
Type	Marking unit (controller + head) 13W Wide area
2D code reader add-in (sold separately)	MD-XAD1/MD-XAD1A
Console (sold separately)	MC-P1
Marking method	XYZ 3-Axis simultaneous scanning method
Marking laser	Type	YVO4 laser, Class 4 Laser Product (IEC60825-1, JIS C6802, FDA [CDRH] part 1040.10)*2
Wavelength	1,064 nm
Output	13 W
Q-switch frequency	CW (continuous wave), 1 to 400 kHz
Guide laser/Working distance pointer	Semiconductor laser, wavelength: 655 nm, output: 1.0 mW, Class 2 Laser Product (IEC60825-1, JIS C6802, FDA [CDRH] part 1040.10)*2
Marking area	330 x 330 x 42 mm
Standard working distance (±variable width)	300 mm (±21 mm)
Marking resolution	5 µm
Scan speed	Max. 8,000 mm/s
Character type	Font	KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font*3
Barcode	CODE39, ITF, 2of5, NW7 (CODABAR), JAN, CODE128, EAN, UPC-A, UPC-E
2D code	QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix)
GS1 DataBar	GS1 DataBar/GS1 DataBar CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBar Limited/ GS1 DataBar Limited CC-A/GS1 DataBar Truncated/GS1 DataBar Truncated CC?A
Logo image	Custom character font and logo (CAD) data, BMP/JPEG/PNG/TIFF
Marking conditions	Workpiece style	Stationary marking, Moving marking (constant, encoder)
Character size (marking height/width)	0.1 to 330 mm
No. of registered programs	2,000 max.
No. of program blocks	256
I/O (Input/output)	Terminal block I/O, MIL connector I/O, contactor control I/O*4
Interface	RS-232C, USB 2.0, Ethernet (100BASE-TX/10BASE-T)*5
Head installation direction	All directions
Head cable length	4.3 ±0.1 m
Cooling method	Forced air cooling
Rated voltage and power consumption	100 to 120/200 to 240 VAC ±10 %, 50/60 Hz, 650 VA max.
Environmental resistance	Enclosure rating	IP64 (marking head)
Pollution degree	2
Overvoltage category	II
Ambient temperature for storage	-10 to +60 °C (No freezing)
Ambient temperature	0 to +40 °C
Ambient humidity for storage	30 to 85 % RH (No condensation)
Relative humidity
Weight	Controller: 23.0 kg Head: 13.6 kg Console: 2.0 kg
1 Type equipped with a contactor control terminal block. 2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. 3 The only TrueType and OpenType fonts supported are those fonts whose “Font embeddability” property is set to “Installable” or “Editable.” This property can be viewed from the Properties dialog boxes of the fonts shown on the [Fonts] screen in [Control Panel]. 4 Supported models: MD-X1000C, MD-X1020C, MD-X1500C, MD-X1520C *5 There are two USB ports: a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder 3 (ActiveX). The Ethernet port supports communication with Marking Builder 3 (ActiveX), TCP/IP communication, EtherNet/IPTM, and PROFINET.

Previous product

Лазерный Маркер Keyence OP-88363

Next product

Лазерный Маркер Keyence MD-X1500

Лазерный Маркер Keyence MD-X1020C

3-Axis Hybrid Laser Marker (Wide area/Contactor)

Описание
Получить КП

Описание

Model	MD-X1020C*1
Type	Marking unit (controller + head) 13W Wide area
2D code reader add-in (sold separately)	MD-XAD1/MD-XAD1A
Console (sold separately)	MC-P1
Marking method	XYZ 3-Axis simultaneous scanning method
Marking laser	Type	YVO4 laser, Class 4 Laser Product (IEC60825-1, JIS C6802, FDA [CDRH] part 1040.10)*2
Wavelength	1,064 nm
Output	13 W
Q-switch frequency	CW (continuous wave), 1 to 400 kHz
Guide laser/Working distance pointer	Semiconductor laser, wavelength: 655 nm, output: 1.0 mW, Class 2 Laser Product (IEC60825-1, JIS C6802, FDA [CDRH] part 1040.10)*2
Marking area	330 x 330 x 42 mm
Standard working distance (±variable width)	300 mm (±21 mm)
Marking resolution	5 µm
Scan speed	Max. 8,000 mm/s
Character type	Font	KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font*3
Barcode	CODE39, ITF, 2of5, NW7 (CODABAR), JAN, CODE128, EAN, UPC-A, UPC-E
2D code	QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix)
GS1 DataBar	GS1 DataBar/GS1 DataBar CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBar Limited/ GS1 DataBar Limited CC-A/GS1 DataBar Truncated/GS1 DataBar Truncated CC?A
Logo image	Custom character font and logo (CAD) data, BMP/JPEG/PNG/TIFF
Marking conditions	Workpiece style	Stationary marking, Moving marking (constant, encoder)
Character size (marking height/width)	0.1 to 330 mm
No. of registered programs	2,000 max.
No. of program blocks	256
I/O (Input/output)	Terminal block I/O, MIL connector I/O, contactor control I/O*4
Interface	RS-232C, USB 2.0, Ethernet (100BASE-TX/10BASE-T)*5
Head installation direction	All directions
Head cable length	4.3 ±0.1 m
Cooling method	Forced air cooling
Rated voltage and power consumption	100 to 120/200 to 240 VAC ±10 %, 50/60 Hz, 650 VA max.
Environmental resistance	Enclosure rating	IP64 (marking head)
Pollution degree	2
Overvoltage category	II
Ambient temperature for storage	-10 to +60 °C (No freezing)
Ambient temperature	0 to +40 °C
Ambient humidity for storage	30 to 85 % RH (No condensation)
Relative humidity
Weight	Controller: 23.0 kg Head: 13.6 kg Console: 2.0 kg
1 Type equipped with a contactor control terminal block. 2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. 3 The only TrueType and OpenType fonts supported are those fonts whose “Font embeddability” property is set to “Installable” or “Editable.” This property can be viewed from the Properties dialog boxes of the fonts shown on the [Fonts] screen in [Control Panel]. 4 Supported models: MD-X1000C, MD-X1020C, MD-X1500C, MD-X1520C *5 There are two USB ports: a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder 3 (ActiveX). The Ethernet port supports communication with Marking Builder 3 (ActiveX), TCP/IP communication, EtherNet/IPTM, and PROFINET.

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-sensors.ru с указанием требуемых позиций и реквизитами компании.

Категория: Лазерная Маркировка

Лазерный Маркер Keyence MD-X1020C

Лазерный Маркер Keyence MB3-H3D1

Лазерный Маркер Keyence MC-P1

Лазерный Маркер Keyence MD-F3220

Лазерный Маркер Keyence MD-F3220C

Лазерный Маркер Keyence MD-F3100

Лазерный Маркер Keyence MD-F3120

Лазерный Маркер Keyence MD-F5220

Лазерный Маркер Keyence MD-F5220C

Лазерный Маркер Keyence MD-X1020C

Похожие товары