| Model | FD-XS1E | |
| Supported pipe materials | Metal pipes, Plastic pipes (soft/hard) *1 | |
| Supported fluids | Liquids (water, oil, adhesive, grease, chemical solution, etc.) *1 | |
| Supported fluid temperature | 0 °C (no freezing on the pipe surface) to 100 °C (Pipe surface temperature) | |
| Clamp set model | Plastic pipe/tube attachment | FD-XC1R1, FD-XC1R2 |
| Metal pipe attachment | FD-XC1M | |
| Maximum rated flow rate | 1000 mL/min | |
| Zero cut flow rate | 50 mL/min*2 (variable, default) | |
| Display resolution | Instantaneous flow rate | 1/10 mL/min (Displayed on controller) |
| Repeatability | Response time 50 ms: ±20 % of RD Response time 500 ms: ±15 % of RD | |
| Hysteresis | Variable | |
| Display method | Status indicator | |
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) , IP68G (JIS C0920) *3 |
| Operating ambient temperature | 0 to 60 °C (No freezing) | |
| Operating ambient humidity | 35 % to 85 %RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each for X,Y,Z direction | |
| Shock resistance | 50 G 11 ms, 3 times each for X,Y,Z direction | |
| Material | Sensor head | Head body: PPS/PPSU, relay amplifier: PPS, cable:PVC, controller connector: PPS/PBT/POM |
| Clamp set | For plastic pipe | Body, fixing screw: PPS, detection surface: special rubber, pipe support rubber: FKM, sensor head fixing screw: SUSXM7 |
| For metal pipe | Metal: SUS304/SUSXM7, detection surface: special rubber, clamp support rubber: FKM, sensor head fixing screw: SUSXM7 | |
| Weight | Approx. 230 g | |
| *1 Liquid must allow for the passage of an ultrasonic pulse, as well as not contain large air pockets or excessive bubbles. Readings may become unstable depending on the type of pipe. *2 The zero cut flow rate can be changed in the settings. When using the unit with a low flow rate range, perform an origin adjustment when the fluid is not moving if you change the zero cut flow rate. *3 The connector part of the sensor head cable is IP65/IP67. |
Датчик процесса Keyence FD-XS1E
Sensor head Maximum rated flow rate 1 L/min
Описание
Получить КП
Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-sensors.ru с указанием требуемых позиций и реквизитами компании.
Похожие товары
Закрыть
Датчик процесса Keyence OP-87274
Connector Cable M12, L-shaped, 10 m, PVC
Закрыть
Датчик процесса Keyence MU-CB4
Power cable for MU-N Series
Закрыть
Датчик процесса Keyence OP-87641
Connector Cable M12, L-shaped, 10 m, Oil-resistant
Закрыть
Датчик процесса Keyence OP-76877
Fixing bracket to fix DIN amplifier (1 pc.)
Закрыть
Датчик процесса Keyence FD-Q32C
Sensor Main Unit 25A/32A Type
Закрыть
Датчик процесса Keyence MU-N11
Multi-Sensor Controller, Main unit
Закрыть
Датчик процесса Keyence RD-50E
Main Unit
Закрыть
Датчик процесса Keyence MU-CC4
Power cable for MU-N Series