| Model | AP-C40W | |
| Type | Amplifier Unit, NPN | |
| Applicable sensor head | AP-41M, AP-41, AP-43, AP-44, AP-48 | |
| Set and display range | -15 to +110 % of F.S.*1 | |
| Display | 3 1/2-digit, 2-colour, 7-segment LED (Character height: 11 mm), Display cycle: 10 times/s | |
| Repeatability | ±0.2 % of F.S. | |
| Operation indicator | Red LED x 2 (corresponding to control output 1 and 2) | |
| Display resolution | AP-41M/41: Standard mode 0.1 kPa, High-resolution/Focus mode 0.01 kPa AP-43: Standard mode 0.001 MPa, High-resolution/Focus mode 0.1 kPa AP-44/48: Standard mode 0.1 kPa, High-resolution/Focus mode 0.02 kPa | |
| Power consumption | Normal | 12 V: 780 mW (65 mA) max., 24 V: 1,080 mW (45 mA) max. |
| Display temperature characteristic | ±1 % of F.S. max. | |
| Hysteresis | Variable (Standard: 0.5 % of FS; high-resolution/focus mode: 0.1 % of F.S.) | |
| Response time (Chattering prevention function) | 1 (in high-speed mode only), 2.5, 5, 100, or 500 ms (selectable) | |
| I/O | Analogue output | 1 to 5 V with load impedance of 1 kW max. (or zero-shift input selectable) |
| Zero-shift input | Input time: 2 ms or more (or analog output selectable) | |
| Control output | NPN open collector 100 mA max. (at 40 V or below) with max., residual voltage of 1 V, 2 outputs (NO or NC selectable) | |
| Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
| Power consumption | Eco mode | 12 V: 540 mW (45 mA) max., 24 V: 840 mW (35 mA) max. |
| Environmental resistance | Ambient temperature | 0 to +50 °C (No freezing) |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Material | Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate | |
| Accessories | Power supply code (2-m cable with connector), head connector, and unit seal | |
| Weight | Approx. 74 g (with 2-m cable) | |
| *1 The focus range applies while in focus mode only. |
Датчик процесса Keyence AP-C40W
Amplifier Unit NPN
Описание
Получить КП
Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-sensors.ru с указанием требуемых позиций и реквизитами компании.
Похожие товары
Закрыть
Датчик процесса Keyence RD-50RW
Main Unit, RS-232C Type
Закрыть
Датчик процесса Keyence MU-CB4
Power cable for MU-N Series
Закрыть
Датчик процесса Keyence OP-87641
Connector Cable M12, L-shaped, 10 m, Oil-resistant
Закрыть
Датчик процесса Keyence OP-96368
RS-232C cable
Закрыть
Датчик процесса Keyence FD-Q50C
Sensor Main Unit 40A/50A Type
Закрыть
Датчик процесса Keyence OP-88027
Sensor-to-controller cable for 4-pin M12 connector type, L-shape, 2m
Закрыть
Датчик процесса Keyence OP-76877
Fixing bracket to fix DIN amplifier (1 pc.)
Закрыть
Датчик процесса Keyence RD-50R
Main Unit, RS-232C Type