| Model | AP-C33W | |
| Type | Positive pressure | |
| Rated pressure | 0 to +1.000 MPa | |
| Fluid type | Air or non-corrosive gases | |
| Type of pressure | Gauge pressure | |
| Display | 3 1/2-digit, 2-color, 7-segment LED (Character height: 11 mm), Display cycle: 10 times/s | |
| Operation indicator | Red LED x 2 (corresponding to control output 1 and 2) | |
| Power consumption | Normal | 12 V: 720 mW (60 mA) or less, 24 V: 960 mW (40 mA) or less*1 |
| Display resolution | Normal mode: 0.001 MPa, Focus mode: 0.1 kPa | |
| Display temperature characteristic | ±1 % of F.S. max. | |
| Hysteresis | Variable (Standard: 0.5 % of F.S.)*2 | |
| Response time (Chattering prevention function) | 2.5, 5, 100, or 500 ms (selectable) | |
| I/O | Analogue output | 1 to 5 V with load impedance of 1 k? max. (or zero-shift input selectable) |
| Zero-shift input | Input time: 2 ms or more. (or analog output selectable) | |
| Control output | NPN open collector 100 mA max. (at 40 V or below) with max. residual voltage of 1 V, 2 outputs (NO or NC selectable) | |
| Pressure port | Rc (PT) 1/8 180 ° rotation | |
| Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
| Power consumption | Eco mode | 12 V: 480 mW (40 mA) or less, 24 V: 720 mW (30 mA) or less*1 |
| Environmental resistance | Pressure resistance | 1.5 MPa |
| Ambient temperature | 0 to +50 °C (No freezing) | |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Material | Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate, Pressure port: Zinc die-casting | |
| Accessories | Power supply cord (2-m with connector), Unit seal | |
| Weight | Approx. 30 g (without cable) /Approx. 85 g (with 2-m cable) | |
| *1 Excluding the current for analog output Including the current for the sensor head *2 A standard of 0.2 % of FS applies while in focus mode. |
Датчик процесса Keyence AP-C33W
Main Unit, Positive-pressure Type, 1 Mpa, NPN
Описание
Получить КП
Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-sensors.ru с указанием требуемых позиций и реквизитами компании.
Похожие товары
Закрыть
Датчик процесса Keyence MU-CB2
Power cable for MU-N Series
Закрыть
Датчик процесса Keyence OP-87641
Connector Cable M12, L-shaped, 10 m, Oil-resistant
Закрыть
Датчик процесса Keyence RD-50EW
Main Unit
Закрыть
Датчик процесса Keyence FD-Q50C
Sensor Main Unit 40A/50A Type
Закрыть
Датчик процесса Keyence OP-96369
25-Pin, D-sub, 6-pin modular conversion connector
Закрыть
Датчик процесса Keyence OP-87640
Connector Cable M12, L-shaped, 2 m, Oil-resistant
Закрыть
Датчик процесса Keyence OP-96368
RS-232C cable
Закрыть
Датчик процесса Keyence OP-88027
Sensor-to-controller cable for 4-pin M12 connector type, L-shape, 2m