Model	LV-N11N
Type	2 output
Output	NPN
Cable/connector	Cable
Main/Expansion unit	Main unit
I/O	Control outputs	2 output
External input	1 input
Monitor output	None
Response time	80 µs (HIGH SPEED)/250 µs (FINE)/500 µs (TURBO)/1 ms (SUPER)/4 ms (ULTRA)/16 ms (MEGA) *1
Output selection	LIGHT-ON/DARK-ON (switch-selectable)
Timer function	Timer OFF/OFF-delay timer/ON-delay timer/One-shot timer, Timer duration selectable: 1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.
Control outputs	NPN open collector 30 V, Residual voltage 1 V or less (Output current: 10 mA or less) / 2 V or less (Output current: 10 to 100 mA) (Stand-alone) 1 output max: 100 mA or less, 2 output total: 100 mA or less (Multiple connections) 1 output max: 20 mA or less
Monitor output	–
External input	Input time 2 ms (ON)/20 ms (OFF) or more*2
Multiple connections to expansion units	Up to 17 units can be connected in total (two-output type is treated as two units)
Protection circuit	Reverse polarity protection, Over-current protection, Surge absorber
Number of interference prevention units	Connected to other than LV-S31: 0 for HIGH SPEED; 2 for FINE/TURBO/SUPER; 4 for ULTRA/MEGA, Connected to LV-S31: 2 for FINE; 4 for TURBO/SUPER/ULTRA/MEGA*3
Case size	H 32.6 mm ? W 9.8 mm ? L 78.7 mm
Rating	Power voltage	24 VDC (operating voltage 10 to 30 VDC (with ripple)), Ripple (P-P) 10 % or less, Class 2 or LPS
Power consumption	Normal: 830 mW or less (at 30 V. 30 mA at 24 V, 56 mA or less at 12 V)4 Eco on mode: 710 mW or less (at 30 V. 26 mA at 24 V, 48 mA or less at 12 V)4 Eco Full mode: 550 mW or less (at 30 V. 21 mA at 24 V, 40 mA or less at 12 V) *5
Environmental resistance	Ambient temperature	-20 to +55 °C (No freezing)*6
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance	500 m/s2, 3 times in each of the X, Y, and Z directions
Material	Cable	PVC
Case	Main unit and cover material: Polycarbonate
Weight	Approx. 75 g
1 80 µs cannot be selected when the LV-S31/S62/S63 is connected 2 Input time is 25 ms (ON)/25 ms (OFF) when external calibration time is selected. 3 These numbers double when “DOUBLE” is selected. 4 Increases 30 mW (1 mA) for High Speed mode. 5 It increases by 15% when connected to the LV-NH100/NH110/NH300. It does not include the power consumption of the load. Power consumption when expansion units are connected is the total power consumption of each amplifier unit. Example: When one main unit (LV-N11N) is connected to 2 expansion units (LV-N12N) and they are used with LV-NH100 heads in HIGH SPEED mode. (1.15 ? 860 mW ? 1) + (1.15 ? 860 mW ? 2) = 2967 mW max. 6 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less for a unit. One or two more units connected: -20 °C to +55 °C ; 3 to 10 more units connected: -20 °C to +50 °C; 11 to 16 more units connected: -20 °C to +45 °C. When using 2-outputs, one unit is counted as two units.

Previous product

Датчик Keyence LV-N10

Next product

Датчик Keyence LV-NH100

Датчик Keyence LV-N11N

Amplifier, Cable, Main unit, NPN

Описание
Получить КП

Описание

Model	LV-N11N
Type	2 output
Output	NPN
Cable/connector	Cable
Main/Expansion unit	Main unit
I/O	Control outputs	2 output
External input	1 input
Monitor output	None
Response time	80 µs (HIGH SPEED)/250 µs (FINE)/500 µs (TURBO)/1 ms (SUPER)/4 ms (ULTRA)/16 ms (MEGA) *1
Output selection	LIGHT-ON/DARK-ON (switch-selectable)
Timer function	Timer OFF/OFF-delay timer/ON-delay timer/One-shot timer, Timer duration selectable: 1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.
Control outputs	NPN open collector 30 V, Residual voltage 1 V or less (Output current: 10 mA or less) / 2 V or less (Output current: 10 to 100 mA) (Stand-alone) 1 output max: 100 mA or less, 2 output total: 100 mA or less (Multiple connections) 1 output max: 20 mA or less
Monitor output	–
External input	Input time 2 ms (ON)/20 ms (OFF) or more*2
Multiple connections to expansion units	Up to 17 units can be connected in total (two-output type is treated as two units)
Protection circuit	Reverse polarity protection, Over-current protection, Surge absorber
Number of interference prevention units	Connected to other than LV-S31: 0 for HIGH SPEED; 2 for FINE/TURBO/SUPER; 4 for ULTRA/MEGA, Connected to LV-S31: 2 for FINE; 4 for TURBO/SUPER/ULTRA/MEGA*3
Case size	H 32.6 mm ? W 9.8 mm ? L 78.7 mm
Rating	Power voltage	24 VDC (operating voltage 10 to 30 VDC (with ripple)), Ripple (P-P) 10 % or less, Class 2 or LPS
Power consumption	Normal: 830 mW or less (at 30 V. 30 mA at 24 V, 56 mA or less at 12 V)4 Eco on mode: 710 mW or less (at 30 V. 26 mA at 24 V, 48 mA or less at 12 V)4 Eco Full mode: 550 mW or less (at 30 V. 21 mA at 24 V, 40 mA or less at 12 V) *5
Environmental resistance	Ambient temperature	-20 to +55 °C (No freezing)*6
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance	500 m/s2, 3 times in each of the X, Y, and Z directions
Material	Cable	PVC
Case	Main unit and cover material: Polycarbonate
Weight	Approx. 75 g
1 80 µs cannot be selected when the LV-S31/S62/S63 is connected 2 Input time is 25 ms (ON)/25 ms (OFF) when external calibration time is selected. 3 These numbers double when “DOUBLE” is selected. 4 Increases 30 mW (1 mA) for High Speed mode. 5 It increases by 15% when connected to the LV-NH100/NH110/NH300. It does not include the power consumption of the load. Power consumption when expansion units are connected is the total power consumption of each amplifier unit. Example: When one main unit (LV-N11N) is connected to 2 expansion units (LV-N12N) and they are used with LV-NH100 heads in HIGH SPEED mode. (1.15 ? 860 mW ? 1) + (1.15 ? 860 mW ? 2) = 2967 mW max. 6 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less for a unit. One or two more units connected: -20 °C to +55 °C ; 3 to 10 more units connected: -20 °C to +50 °C; 11 to 16 more units connected: -20 °C to +45 °C. When using 2-outputs, one unit is counted as two units.

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-sensors.ru с указанием требуемых позиций и реквизитами компании.

Категория: Датчики

Датчик Keyence LV-N11N

Датчик Keyence FS2-65

Датчик Keyence Multi-Purpose CCD Laser Micrometer

Датчик Keyence FS2-60P

Датчик Keyence FS-16G

Датчик Keyence FS-15IR

Датчик Keyence FS-L41

Датчик Keyence FS2-62

Датчик Keyence FS2-60G

Датчик Keyence LV-N11N

Похожие товары