| Model | IL-1500 | |
| Type | Panel mount | |
| Main unit/Expansion unit | Main unit | |
| Head compatibility | Compatible | |
| Display | Minimum displayable unit | IL-S025/IL-030: 1 µm, IL-S065/IL-065/IL-100: 2 µm, IL-300: 10 µm, IL-600: 50 µm |
| Display range | IL-S025/IL-030/IL-S065/IL-065/IL-100: ±99.999 mm to ±99 mm (4 levels selectable), IL-300/IL-600: ±999.99 mm to ±999 mm (3 levels selectable) | |
| Display rate | Approx. 10 times/sec. | |
| Analogue voltage output | ±5 V, 1 to 5 V, 0 to 5 V Output impedance 100 ?*1 | |
| Analogue current output | 4 to 20 mA Maximum load resistance of 350 ?*1 | |
| Control input | Bank switch input | Non-voltage input*2 |
| Zero-shift input | ||
| Stop emission input | ||
| Timing input | ||
| Reset input | ||
| Control output | Judgment output | Open collector output (NPN, PNP changeover possible/N.O., N.C. changeover possible)*3 |
| Alarm output | Open collector output (NPN, PNP changeover possible/N.C.)*3 | |
| Current | Power voltage | 10 to 30 VDC ripple (P-P) 10% included, Class 2*4 |
| Power consumption | 2500 mW or less (at 30 V: 84 mA or less) | |
| Environmental resistance | Pollution degree | 2 |
| Ambient temperature | -10 to +50 °C (No condensation or freezing) | |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Material | Case / Front sheet: Polycarbonate; Key tops: Polyacetel; Cable: PVC | |
| Weight | Approx. 170 g (including attachments) | |
| *1 Select and use one of ±5 V, 1 to 5 V, 0 to 5 V or 4 to 20 mA. *2 Assign an input of your choice to the 4 external input lines before using. *3 The NPN open collector rated output is: 50 mA max./ch (20 mA when adding an expansion unit) less than 30 V, residual voltage less than 1 V (less than 1.5 V when adding over 6 units including the main unit) The PNP open collector rated output is: 50 mA max./ch (20 mA/ch when adding expansion units), less than power voltage, and less than 2 V residual voltage (less than 2.5 V when adding over 6 units including the main unit) *4 If there are over 6 additional expansion units, please use a power voltage of 20 to 30 V. |
Датчик Keyence IL-1500
Amplifier unit, Panel mount type
Описание
Получить КП
Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-sensors.ru с указанием требуемых позиций и реквизитами компании.
Похожие товары
Закрыть
Датчик Keyence FS-L51
Transmissive Sensor Head
Закрыть
Датчик Keyence FS-15G
Amplifier Unit
Закрыть
Датчик Keyence FS-16IR
Amplifier Unit
Закрыть
Датчик Keyence FS2-62
Fibre Amplifier, Cable Type, NPN
Закрыть
Датчик Keyence FS2-62P
Fibre Amplifier, Cable Type, PNP
Закрыть
Датчик Keyence F-20
FS-L side-view attachment
Закрыть
Датчик Keyence FS-14
Fibre Amplifier NPN
Закрыть