|Detection system||Scale Shot System, absolute (no tracking errors) type|
|Measuring range||32 mm|
|Indicated accuracy||3 µm (p-p)*1|
|Measuring force||Downward mounting||2.1 N*2|
|Side mounting||1.8 N*2|
|Upward mounting||1.5 N*2|
|Sampling cycle||1 ms|
|Fluid used||Dry air|
|Operation indicator light||2-colour LED (red, green)|
|Environmental resistance||Enclosure rating||IP67 (IEC)*3|
|Pressure resistance||1 MPa|
|Applied pressure range||0.25 MPa to 0.50 MPa|
|Ambient temperature||0 to +55 °C (No freezing)|
|Relative humidity||35 to 85 % RH (No condensation)|
|Vibration resistance||10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions*4|
|Materials||Main body||Main body case: die-cast zinc, Cylinder section: aluminium alloy, Air joint resin: polyacetal, Air joint metal: nickel-plated brass, Indicator: polyarylate (PAR)|
|Sensor head cable||Optional (connect to the M8 connector)|
|Weight||Approx. 340 g (not including cable)|
|*1 Value when the ambient temperature is 20 °C.|
*2 Representative value at the centre of the measuring range. Please note that the measuring force varies by the installation state of the dust boot.
*3 Connect an exhaust joint to the air tube and ensure that foreign matter does not enter the tube from joint.
*4 When using mounting bracket D (OP-84327), the double amplitude is 0.75 mm.
*5 Contacts are available as options sold separately.
Датчик Keyence GT2-A32
Sensor Head, Air Cylinder Model