Датчик Keyence GT2-100P

Amplifier Unit, Large Display Amplifier

Описание
Получить КП

Model	GT2-100P
Output	PNP output
Mounting type	Panel mount/Screw mounting using optional mounting bracket
Main unit/Expansion unit	–
Power supply voltage	20 to 30 VDC, including 10 % ripple (P-P), Class 2
Power consumption	Normal	4,500 mW max. (30 V, 150 mA max.)
Power saving (Eco)	3,600 mW max. (30 V, 120 mA max.)*1
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
Other displays	2-colour, 13-level bar LED display (red, green), indicators (red, green)
Display range	-199.999.9 to 199.999.9
Display resolution	0.1 ?m
Sampling rate	1,000 times/sec.
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	PNP open collector, 30 V 50 mA or less*2, residual voltage 1 V or less
Response time	hsp (3 ms), 5 ms, 10 ms, 100 ms, 500 ms, 1 s
Environmental resistance	Ambient temperature	-10 to +50 °C (No freezing)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 0.15 mm, 2 hours in each of the X, Y, and Z directions
Materials	Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET
Power supply / I/O cable	Power supply: Terminal block, I/O: 20-pin connector (MIL standard)
Weight	Approx. 380 g
1 For GT2-100 Series, when the maximum number of sensor heads are connected and all units are set to power saving mode. 2 When 2 or more sensor heads are connected, 20 mA or less.

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-sensors.ru с указанием требуемых позиций и реквизитами компании.

Датчик Keyence FS2-60G

Датчик Keyence FS-15IR

Датчик Keyence FS-15G

Датчик Keyence OP-6025

Датчик Keyence FS-L50

Датчик Keyence FS-16IR

Датчик Keyence FS-17

Датчик Keyence FS-L70

Датчик Keyence GT2-100P

Похожие товары