Model	FS-V30
Type	0-line
Output	NPN
Main unit/Expansion unit	Expansion unit
Control output	N/A
Monitor output (1 to 5 V)
External input
Light source	Red, 4-element LED (Wavelength: 640 nm)
Response time	193 µs to 16.7 ms
Output selection	LIGHT-ON/DARK-ON (switch-selectable)
Display indicator	Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P, Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display
Detection mode	Light intensity (area detection possible, automatic sensitivity-tracking function provided)
Timer function	OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.
Control output	NPN open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.
External inputy	Input time: 2 ms (ON)/20 ms (OFF) min.*2
Unit expansion	Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.
Number of interference prevention units	Normal operation	HIGHSPEED:0 FINE:4 TURBO/SUPER/ULTRA/MEGA:8?
Size	30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Power consumption	Normal: 710 mW max. (Using 24 V, 29 mA max., using 12 V, 40 mA max.)/Power saving: 540 mW max. (Using 24 V, 22 mA max., using 12 V, 28 mA max.)*3
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.
Ambient temperature	-10 to +55 °C (No freezing)*4
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance	500 m/s2, 3 times in each of the X, Y, and Z directions
Case material	Polycarbonate
Accessories	N/A
Weight	Approx. 25 g
1 Total current of two outputs should be less than 100 mA. 2 Only available on certain models. 3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA). 4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 1 to 2 Units: -10 to +55 °C, 3 to 10 Units: -10 to +50 °C, 11 to 16 Units: -10 to +45 °C

Previous product

Датчик Keyence FS-V22R

Next product

Датчик Keyence FS-V31C

Датчик Keyence FS-V30

Fibre Amplifier, Zero-line Expansion Unit, NPN

Описание
Получить КП

Описание

Model	FS-V30
Type	0-line
Output	NPN
Main unit/Expansion unit	Expansion unit
Control output	N/A
Monitor output (1 to 5 V)
External input
Light source	Red, 4-element LED (Wavelength: 640 nm)
Response time	193 µs to 16.7 ms
Output selection	LIGHT-ON/DARK-ON (switch-selectable)
Display indicator	Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P, Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display
Detection mode	Light intensity (area detection possible, automatic sensitivity-tracking function provided)
Timer function	OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.
Control output	NPN open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.
External inputy	Input time: 2 ms (ON)/20 ms (OFF) min.*2
Unit expansion	Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.
Number of interference prevention units	Normal operation	HIGHSPEED:0 FINE:4 TURBO/SUPER/ULTRA/MEGA:8?
Size	30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Power consumption	Normal: 710 mW max. (Using 24 V, 29 mA max., using 12 V, 40 mA max.)/Power saving: 540 mW max. (Using 24 V, 22 mA max., using 12 V, 28 mA max.)*3
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.
Ambient temperature	-10 to +55 °C (No freezing)*4
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance	500 m/s2, 3 times in each of the X, Y, and Z directions
Case material	Polycarbonate
Accessories	N/A
Weight	Approx. 25 g
1 Total current of two outputs should be less than 100 mA. 2 Only available on certain models. 3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA). 4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 1 to 2 Units: -10 to +55 °C, 3 to 10 Units: -10 to +50 °C, 11 to 16 Units: -10 to +45 °C

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-sensors.ru с указанием требуемых позиций и реквизитами компании.

Категория: Датчики

Датчик Keyence FS-V30

Датчик Keyence FS-L70

Датчик Keyence FS2-60

Датчик Keyence FS-15

Датчик Keyence FS-15G

Датчик Keyence FS-16G

Датчик Keyence OP-5148

Датчик Keyence FS-15IR

Датчик Keyence FS-16IR

Датчик Keyence FS-V30

Похожие товары