Датчик Keyence FS-V22G

Fibre Amplifier, Cable Type, Expansion Unit, NPN

Описание
Получить КП

Model	FS-V22G
Type	1-line expansion unit, NPN
Light source	Green LED
Response time	250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /500 µs (HIGH RESOLUTION) /50 µs (HIGH SPEED)
Output selection	Light-ON/Dark-ON selectable
Indicator lamp	Operation indicator: Red LED Dual digital monitor: Dual 7-segment display [Preset Value (4-digit green LED indicator) and Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 65,520; Excess gain: 0 P to 999 P] Hold function: Possible to display both peak and bottom hold values. Bar LED monitor: Possible to display together with Current Value Excess gain displayed (85 to 115 % in 7 steps)
Detection mode	Light intensity/rising edge/falling edge
Shift function	Max. ±1,999 (variable)
Timer function	Mode	Timer OFF/OFF-delay timer/ON-delay timer/One-shot timer, selectable
Variable range	1 to 500 ms [1 to 30 ms (in 1 ms increments), 30 to 50 ms (in 2 ms increments), 50 to 200 ms (in 10 ms increments), 200 to 500 ms (in 50 ms increments)]
Accuracy	±10 % of the Preset Value
Control output	NPN open-collector 20 mA max. (40 VDC max.), Residual voltage: 1 V max.
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Power consumption	Normal	S-APC OFF: 580 mW max. (24 mA max. at 24 VDC), S-APC ON: 720 mW max. (30 mA max. at 24 VDC)*1
ECO half	S-APC OFF: 480 mW max. (20 mA max. at 24 VDC), S-APC ON: 600 mW max. (25 mA max. at 24 VDC)*1
ECO all	S-APC OFF: 430 mW max. (18 mA max. at 24 VDC), S-APC ON: 550 mW max. (23 mA max. at 24 VDC)*1
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.
Ambient temperature	-10 to +55 °C (No freezing)*2
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance	500 m/s2, 3 times in each of the X, Y, and Z directions
Case material	Polycarbonate
Weight	Approx. 45 g (including 2-m cable)
1 S-APC will be always turned ON when the high-resolution or high-speed mode is selected. S-APC is by default set to OFF in any other mode. 2 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 3 to 10 Units: –10 to +50 °C 11 to 16 Units: –10 to +45 °C

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-sensors.ru с указанием требуемых позиций и реквизитами компании.

Датчик Keyence FS-15IR

Датчик Keyence OP-236 (OP-0236)

Датчик Keyence FS-L51

Датчик Keyence FS2-65

Датчик Keyence FS2-62P

Датчик Keyence FS2-60G

Датчик Keyence Multi-Purpose CCD Laser Micrometer

Датчик Keyence FS-L50

Датчик Keyence FS-V22G

Похожие товары