| Model | FS-R3 | |
| Response time | 350 µs to 1 ms *1 | |
| Indicator lamp | Red LED | |
| Timer function | ||
| Number of inputs | 2 | |
| Input signal | NPN/PNP non-voltage input (contact,solid-state) switching | |
| Output mode | N.O./N.C. (selectable) | |
| Rating | Power voltage | 12 to 24 VDC ±5 %, Ripple (P-P) 5 % or less*2 |
| Current consumption | 50 mA or less, plus current consumed by connected sensor (100 mA or less) | |
| Environmental resistance | Ambient temperature | -10 to +50 °C (No freezing)*3 |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Shock resistance | 500 m/s2, 3 times in each of the X, Y, and Z directions | |
| Case material | Polycarbonate | |
| Weight | Approx. 30 g | |
| *1 The response speed varies depending on the number of expansion units connected. *2 Change the supply voltage to meet the requirement of the input device (PLC, etc.). *3 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 1 to 5 Units: -10 to +50 °C, 6 to 8 Units: -10 to +45 °C. |
Датчик Keyence FS-R3
Terminal Block Unit
Описание
Получить КП
Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-sensors.ru с указанием требуемых позиций и реквизитами компании.
Похожие товары
Закрыть
Датчик Keyence FS2-60
Fibre Amplifier, Cable Type, NPN
Закрыть
Закрыть
Датчик Keyence OP-6025
FS2 Mounting Bracket
Закрыть
Датчик Keyence FS-L41
Reflective Sensor Head
Закрыть
Датчик Keyence FS-16
Fibre Amplifier NPN
Закрыть
Датчик Keyence FS-15G
Amplifier Unit
Закрыть
Датчик Keyence FS-16IR
Amplifier Unit
Закрыть
Датчик Keyence FS2-60G
Fibre Amplifier, Cable Type, NPN