| Model | FS-M1P | |
| Type | Main unit | |
| Output | PNP | |
| Light source | Red LED | |
| Sensitivity adjustment/Mode selection | 8-turn trimmer (with indicator), FINE/TURBO (switch-selectable) | |
| Response time | 250 µs (FINE) /500 µs (TURBO) | |
| Operation mode | LIGHT-ON/DARK-ON (switch-selectable) | |
| Indicator lamp | Output: Red LED Stable operation: Green LED | |
| Timer function | ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable) | |
| Input | ? | |
| Control output | PNP open-collector 100 mA max. (40 VDC max.), Residual voltage: 1 V max. | |
| Stability output | PNP open-collector 50 mA max. (40 VDC max.), Residual voltage: 1 V max.*1 | |
| Protection circuit | Reversed polarity protection, Overcurrent protection, Surge absorber | |
| Unit expansion | Up to 16 expansion units can be connected (a total of 17 units)*2 | |
| Mutual interference suppression | FINE : 4, TURBO/SUPER: 8 | |
| Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
| Current consumption | 35 mA or less | |
| Environmental resistance | Ambient light | Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max. |
| Ambient temperature | -10 to +55 °C (No freezing)*3 | |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Shock resistance | 500 m/s2, 3 times in each of the X, Y, and Z directions | |
| Case material | Polycarbonate | |
| Accessories | Fittings | |
| Weight | Approx. 75 g | |
| *1 Only the FS-T1 and FS-M1 can provide stability outputs. *2 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 3 to 10 Units: -10 to +50°C (14 to 122°F), 11 to 16 Units: -10 to +45°C (14 to 113°F) *3 When extended, the ambient usage temperature varies according to the following conditions. Be sure to mount units on a DIN rail (attached to a metal plate) and ensure that the output current is 20 mA or less. When extended |
Датчик Keyence FS-M1P
Fibre Amplifier, Cable Type, Main Unit, PNP
Описание
Получить КП
Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-sensors.ru с указанием требуемых позиций и реквизитами компании.
Похожие товары
Закрыть
Датчик Keyence OP-5148
PNP Adapter
Закрыть
Датчик Keyence FS-L50
Transmissive Sensor Head
Закрыть
Закрыть
Датчик Keyence FS2-60G
Fibre Amplifier, Cable Type, NPN
Закрыть
Датчик Keyence OP-6025
FS2 Mounting Bracket
Закрыть
Закрыть
Датчик Keyence FS-15G
Amplifier Unit
Закрыть
Датчик Keyence FS-17
Fibre Amplifier NPN