|Main unit/Expansion unit||Main unit|
|Response time||200 µs (HIGH SPEED) /1 ms (FINE) /4 ms (TURBO) /8 ms (SUPER)|
|Control output||NPN open-collector x 4 channels, 40 VDC max., Up to 100 mA for one output, Up to 200 mA in total of 4 outputs, Residual voltage: 1.0 V max.*2|
|Protection circuit||Reverse-polarity protection, overcurrent protection, surge absorber|
|External tuning input, external bank switch input (C/C + I-mode), external shift input (super I-mode)||Input time: 20 ms min.|
|Timer function||Timer OFF/OFF-delay/ON-delay/One-shot, Timer time: 1 to 1000 ms adjustable (for each bank respectively)|
|Unit expansion||Up to 3 units (4 units total including the main unit)|
|Number of interference prevention units||0 for HIGH SPEED; 2 for FINE/TURBO/SUPER|
|Rating||Power voltage||24 VDC, Ripple (P-P) 10 % or less|
|Power consumption||Normal mode: 1.5 W (62.5 mA or less), Eco-mode: 1 W (42.0 mA or less)|
|Environmental resistance||Ambient temperature||-10 to +55 °C (No freezing)*3|
|Vibration resistance||10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z axis|
|Material||Housing, cover: Polycarbonate|
|Weight||Approx. 110 g|
|*1 The expansion unit of the FS-V20 Series cannot be connected to the main unit of the CZ-V20 Series. To connect the FS and CZ Series units, connect the expansion unit of the CZ-V20 Series to|
the main unit of the FS-V20 Series.
To connect two or more expansion units, connect the CZ-V20 Series units on the right of the FS-V20 Series units.
*2 20 mA max. when several units are connected.
*3 When several units are connected, the acceptable ambient temperature varies depending on the conditions given below. To connect several units, be sure to mount them to a DIN rail and to limit the output
current to a maximum of 20 mA.
When 1 or 2 units are connected: -10 to +50 °C
When 3 units are connected: -10 to +45 °C
Датчик Keyence CZ-V21A
Amplifier Unit, Main Unit, NPN