Датчик Keyence CZ-K1P

Amplifier Unit, Main Unit, PNP

Описание
Получить КП

Model	CZ-K1P
Output	PNP
Light source	Red LED, Green LED, Blue LED
Response time	300 µs/1 ms (switch-selectable)
Indicator lamp	Output: Red LED, Calibration: Orange LED, External synchronization input: Green LED, Matching rate/received light intensity: LCD (Red/Green)
Error indication	Excess light intensity, insufficient light intensity, insufficient colour difference
Calibration method	1-point/2-point calibration (switch-selectable)
Tolerance value adjustment	Numerical value setting on digital display
Differentiation mode	C mode/C + I mode/I mode (switch-selectable)
Timer function	OFF-delay timer (40 ms)/Timer OFF (switch-selectable)
Output selection	Match output: Turns on when target colour matches registered colour. Mismatch output: Turns on when target colour is different from registered colour. (switch-selectable)
External synchronisation input	Response speed: 500 µs max.
External calibration input	Input response time: 20 ms min.
Registered colour selection	8-bank selection (By external input), Non-voltage input, Input response time: 20 ms min.
Control output	PNP: 40 VDC max. (100 mA max.), Residual voltage: 1.0 V max.
Protection circuit	Reverse-polarity protection (power supply), overcurrent protection (output), surge absorber (output)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Current consumption	75 mA or less
Environmental resistance	Ambient light	Incandescent lamp: 5,000 lux max., Sunlight: 10,000 lux max.
Ambient temperature	-10 to +55 °C (No freezing)*1
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance	500 m/s2, 3 times in each of the X, Y, and Z directions
Case material	Polycarbonate
Weight	Approx. 115 g (including 2-m cable)
*1 When extended, the ambient usage temperature varies according to the following conditions. Be sure to mount units on a DIN rail (attached to a metal plate) and ensure that the output current is 20 mA or less. When extended

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-sensors.ru с указанием требуемых позиций и реквизитами компании.

Датчик Keyence FS-15

Датчик Keyence FS2-62P

Датчик Keyence FS-L70

Датчик Keyence Digital Display Compact Laser Thrubeam Sensor

Датчик Keyence FS-15G

Датчик Keyence FS-T22

Датчик Keyence OP-5148

Датчик Keyence FS2-65P

Датчик Keyence CZ-K1P

Похожие товары