Датчик измерения Keyence LT-9501HSO(5654)

Controller, Not Subject to Export Control, with Camera Function

Описание
Получить КП

Model	LT-9501HSO(5654)
Measuring unit compatibility	Measuring units are interchangeable without factory recalibration.
Display	Minimumdisplayable unit	0.1 µm*1
Display range	±9,999.99 µm
Microscope function	Available
Display cycle	10 times/sec.*2
Terminal block	Analogue output	±10 V x 2 outputs, output impedance: 100 ?
Timing input	Non-voltage input
Reset input
Auto-zero input
Monitor dedicated power supply	24 VDC*3
Control I/O	Judgment mode	3-step limits output	For OUT1 and OUT2, and NPN open collector output*4
Binary mode	Binary output	Measured data output (21 bits), OUT1/OUT2/PROFILE selectable NPN open collector output*4
Strobe output	NPN open collector output*4
Binary selector output
Binary selection input	Non-voltage input*4
Stability output	NPN open collector output
Laser remote input	Non-voltage input
Program switching input	Non-voltage input x 3 inputs
RS-232C interface	Measured data output and control I/O (Selectable up to baud rate 115200 bps.)
Video output	NTSC compliant (PIN connector)
Main functions	Displacement mode	Distance measurement, Transparent object thickness measurement, Surface selection, Dark-out, Mask, Trend graph display, and Scan width/interval change*5
Profile mode	?*5
Common	Light intensity accumulation, Microscope (LT-9501H, LT-9501HSO (5654) only), Tolerance judgement, 8-program registration, Calibration, Averaging, Hold modes, Auto-zero, and interface language selection
Rating	Power voltage	100 to 240 VAC ±10 %, 50/60 Hz
Power consumption	110VA or less
Environmental resistance	Pollution degree	2
Overvoltage category	II
Ambient temperature	0 to +35 °C
Relative humidity	35 to 85 % RH (No condensation)
Weight	Approx. 2.4 kg
1 Display changes every ±0.3 µm. 2 Varies depending on the setting 3 Dedicated power supply for the monitor specified by KEYENCE. 4 Select either the Limits mode or the Binary mode. *5 Select either the Distance mode or the Profile mode. (Only distance mode is available with the LT-9501HSO (5654) and LT-9001HSO (5655).) The rating of the NPN open-collector output is 30 mA (30 V or lower) maximum, and residual voltage is 0.5 V. The rating of the Non-voltage input is ON voltage 1 V or lower, and OFF current 0.6 mA or lower.

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-sensors.ru с указанием требуемых позиций и реквизитами компании.