| Model | LS-9030M*1 | |
| Type | Head: Standard model | |
| Measurement range | 0.3 mm (0.08 mm) to 30 mm | |
| Smallest detectable object | 0.3 mm (0.08 mm) | |
| Transmitter/receiver distance | 160 ±40 mm | |
| Repeatability | ±0.1 µm*2 | |
| Measurement accuracy | ±2 µm*3 | |
| Sampling cycle | 16,000 samples/sec.*4 | |
| Transmitter/receiver direction and position detection | Detection area | 20 x 24 mm |
| Smallest detectable object | 0.3 mm | |
| Repeatability | ±0.2 mm*5 | |
| Sampling cycle | 4,000 samples/sec. | |
| Light source | InGaN green LED | |
| Monitor camera | Provided | |
| Environmental resistance | Enclosure rating | IP67 (including connector) |
| Ambient light | Incandescent lamp/Fluorescent lamp: 3,000 lux or lower | |
| Ambient temperature | 0 to +50 °C | |
| Relative humidity | 20 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Shock resistance | 15 G/6 ms | |
| Material | Aluminum | |
| Weight | Transmitter: Approx. 440 g Receiver: Approx. 500 g Base: Approx. 430 g | |
| *1 The values in brackets are measured in ultra-thin mode. For details on the accuracy of ultra-thin mode, contact the nearest KEYENCE office. *2 A ±2? margin of error when measuring a o10 mm rod in the centre of the measurement area using outer diameter mode with the average measurement number set as 2,048 times. *3 Margin of error when a moving o10 mm rod is measured in the 10 mm x 20 mm measurement area using outer diameter mode. *4 The sampling cycle is changed by the number of OUT set, and by the use of the mutual interference prevention function. *5 A ±2? margin of error when measuring the position of a o10 mm rod in the centre of the measurement area with the average measurement number set as 512 times. |
Датчик измерения Keyence LS-9030M
Head: Standard model with monitor camera
Описание
Получить КП
Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-sensors.ru с указанием требуемых позиций и реквизитами компании.
Похожие товары
Закрыть
Датчик измерения Keyence GT-H10L
Sensor Head, Low Measuring Force Type
Закрыть
Датчик измерения Keyence GT-72AP
Amplifier Unit, DIN Rail Type, PNP
Закрыть
Датчик измерения Keyence GT-H10
Sensor Head
Закрыть
Датчик измерения Keyence OP-76877
Fixing bracket to fix DIN amplifier (1 pc.)
Закрыть
Датчик измерения Keyence OP-26751
End unit (2 pcs.)
Закрыть
Датчик измерения Keyence GT-71A
Amplifier Unit, DIN Rail Type, NPN
Закрыть
Датчик измерения Keyence GT-75AP
Amplifier Unit, Panel Mount Type, PNP
Закрыть
Датчик измерения Keyence OP-77678
Contact, Standard Type