|Type||Head: Standard model|
|Measurement range||0.3 mm (0.08 mm) to 30 mm|
|Smallest detectable object||0.3 mm (0.08 mm)|
|Transmitter/receiver distance||160 ±40 mm|
|Measurement accuracy||±2 µm*3|
|Sampling cycle||16,000 samples/sec.*4|
|Transmitter/receiver direction and position detection||Detection area||20 x 24 mm|
|Smallest detectable object||0.3 mm|
|Sampling cycle||4,000 samples/sec.|
|Light source||InGaN green LED|
|Monitor camera||Not provided|
|Environmental resistance||Enclosure rating||IP67 (including connector)|
|Ambient light||Incandescent lamp/Fluorescent lamp: 3,000 lux or lower|
|Ambient temperature||0 to +50 °C|
|Relative humidity||20 to 85 % RH (No condensation)|
|Vibration resistance||10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions|
|Shock resistance||15 G/6 ms|
|Weight||Transmitter: Approx. 440 g|
Receiver: Approx. 440 g
Base: Approx. 430 g
|*1 The values in brackets are measured in ultra-thin mode. For details on the accuracy of ultra-thin mode, contact the nearest KEYENCE office.|
*2 A ±2? margin of error when measuring a o10 mm rod in the centre of the measurement area using outer diameter mode with the average measurement number set as 2,048 times.
*3 Margin of error when a moving o10 mm rod is measured in the 10 mm x 20 mm measurement area using outer diameter mode.
*4 The sampling cycle is changed by the number of OUT set, and by the use of the mutual interference prevention function.
*5 A ±2? margin of error when measuring the position of a o10 mm rod in the centre of the measurement area with the average measurement number set as 512 times.
Датчик измерения Keyence LS-9030
Head: Standard model without monitor camera
Категория: Датчики измерения