| Model | IB-1050 | |
| Type | DIN rail mount | |
| Main unit/Expansion unit | Expansion unit | |
| Head compatibility | Yes | |
| Display | Display resolution | 0.01 %, 0.1 %, 1 % (switchable) |
| Display range | –99.999 to 99.999, –99.99 to 99.99, –99.9 to 99.9, –99 to 99 (switchable) | |
| Digital display method | Dual 7-segment display, Upper level: 5 red digits, Lower level: 5 green digits | |
| Operation indicator | Judgment indicator: 2-colour (green/red) LED (HI, GO, LO), Bank indicator: Green LED x 4, Laser emission warning indicator: Green LED, Others: Green LED x 8, red LED x 3 | |
| Analogue output voltage | No | |
| Analogue current output | ||
| Control Input | Bank switch input, zero shift input | Non-voltage input*1 |
| Control input | Zero-shift input | |
| Laser emission stop input | ||
| Timing input | ||
| Reset input | ||
| Adjust input | ||
| Control output | Judgment output (check output) | Open collector (NPN/PNP switchable, N.O./N.C. switchable)*2 |
| Power supply | Power consumption | 1,950 mW or less (at 30 V, 65 mA max.)*3 |
| Rating | Power voltage | Supplied from main unit |
| Environmental resistance | Pollution degree | 2 |
| Ambient temperature | -10 to +50 °C (No condensation or freezing) | |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z axis | |
| Material | Case/Front panel: polycarbonate, keytop: polyacetal, cable: PVC | |
| Weight | Approx. 140 g | |
| *1 The four external input wires are assigned with desired inputs. Rated no-voltage input: ON voltage 2 V or less, OFF current 0.05 mA or less Rated voltage input: Max. input rating 30 V or less, ON voltage 7.5 V or more, OFF current 0.05 mA or less *2 Rated NPN open collector output: Max. 50 mA/ch (20 mA/ch when expansion units are connected), 30 V or less, residual voltage 1 V or less Rated PNP open collector output: Max. 50 mA/ch (20 mA/ch when expansion units are connected), 30 V or less, residual voltage 2 V or less *3 The power consumption with slave units installed is the total of each amplifier unit’s power consumption. Example: When using one master unit (IB-1000) with two slave units (IB-1050) (1,950 mW x 1) + (1,950 mW x 2) = 5,850 mW |
Датчик измерения Keyence IB-1050
Amplifier Unit, DIN Rail Type
Описание
Получить КП
Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-sensors.ru с указанием требуемых позиций и реквизитами компании.
Похожие товары
Закрыть
Датчик измерения Keyence OP-76874
Head Mounting Bracket A
Закрыть
Датчик измерения Keyence GT-76A
Amplifier Unit, Panel Mount Type, NPN
Закрыть
Датчик измерения Keyence GT-71AP
Amplifier Unit, DIN Rail Type, PNP
Закрыть
Датчик измерения Keyence GT-72AP
Amplifier Unit, DIN Rail Type, PNP
Закрыть
Датчик измерения Keyence OP-26751
End unit (2 pcs.)
Закрыть
Датчик измерения Keyence GT-A22
Sensor Head
Закрыть
Датчик измерения Keyence GT-H10L
Sensor Head, Low Measuring Force Type
Закрыть
Датчик измерения Keyence GT-72A
Amplifier Unit, DIN Rail Type, NPN