| Model | EX-V64E | |
| Type | Controller | |
| Shape | 14 x 30 x 4.8 mm Thin profile | |
| Measuring range | 0 to 4 mm | |
| A/D converting system | Sequential conversion | |
| Display range | -19999 to +19999 | |
| Linearity | ±0.3% of F.S. | |
| Resolution (No. of averaging measurements: 64) | 2 µm | |
| Sampling rate | 40000 samplings max./sec. *1 | |
| Display speed | 20 times/second | |
| Display power | 7-segment 2-colour LED | |
| Over-range alarm | ±FFFF is displayed. | |
| Control input | Timing input | NPN open-collector or non-voltage contact signal |
| Reset input | ||
| Auto-zero input | ||
| Judgment output: Inhibit input | ||
| Synchronization/external settings input | ||
| Controloutput | Setting method | Upper/lower 2-level setting x 4 patterns (selectable) |
| Control output | Signal | NPN open-collector (HIGH, GO and LOW): 100 mA max. (40 V max.) |
| Controloutput | Response time | 0.075 ms (at maximum speed) |
| OFF-delay time | 60 ms (ON/OFF selectable) | |
| Strobe output | NPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. (N.O.) | |
| Control output | Alarm output | NPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. (N.C.) |
| Analogue output voltage | Output voltage | ±0.5 V |
| Impedance | 100 ? | |
| Response time | 0.075 ms (at maximum speed) | |
| Temperature characteristics | 0.07% of F.S./°C *2 | |
| Major functions | FLL, digital filter, auto zero, offset, calculation, measurement mode (15 types), judgment value memory (4 sets), decimal point shift, display digit changing, display of various errors, etc. | |
| Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less |
| Current consumption | 240 mA or less | |
| Environmental resistance | Ambient temperature | 0 to +50 °C |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Weight | Approx. 235 g | |
| *1 When the digital filter function is used, the sampling rate is 20000 sampling/sec. *2 When the distance between the sensor head and the target is within 50% of the measuring range. |
Датчик измерения Keyence EX-V64E
Amplifier Unit NPN
Описание
Получить КП
Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-sensors.ru с указанием требуемых позиций и реквизитами компании.
Похожие товары
Закрыть
Датчик измерения Keyence OP-76877
Fixing bracket to fix DIN amplifier (1 pc.)
Закрыть
Датчик измерения Keyence GT-A10
Sensor Head, Air Cylinder Model
Закрыть
Датчик измерения Keyence OP-77678
Contact, Standard Type
Закрыть
Датчик измерения Keyence OP-76874
Head Mounting Bracket A
Закрыть
Датчик измерения Keyence GT-71AP
Amplifier Unit, DIN Rail Type, PNP
Закрыть
Датчик измерения Keyence GT-A22
Sensor Head
Закрыть
Датчик измерения Keyence OP-77680
Contact, Roller Type
Закрыть
Датчик измерения Keyence GT-75AP
Amplifier Unit, Panel Mount Type, PNP