|Amplifier unit||EX-501, EX-502|
|Shape||M8, Threaded, Non-shielded|
|Measuring range||0 to 1 mm (EX-501W)
0 to 2 mm (EX-502W)
|Analogue output||Output voltage||0 to 5 V (Output impedance: 100 ?)*1|
|Output current||4 to 20 mA (Applicable load: 0 to 350 ?)*1|
|Resolution||0.03% of F.S. (RESPONSE = 3,4)*1|
|Linearity||±0.3% of F.S. (RESPONSE = 2,3,4)*1|
|0.1 ms (RESPONSE = 1), 1 ms (RESPONSE = 2), 10 ms (RESPONSE = 3), 100 ms (RESPONSE = 4)*1|
|Disconnection alarm output (N.C.)||NPN: 100 mA max. (40 V), Residual voltage: 1 V max.*3|
|Functions||Auto-zero function/Auto-span function, Response time selector function/
Preset metal characteristic memory function, Cable length selector function/Interference suppression function
|Temperature characteristics||0.03% of F.S./°C*4*1|
|Rating||Power voltage||12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less|
|Current consumption||220 mA max.|
|Environmental resistance||Enclosure rating||IP67|
|Ambient temperature||-20 to +105 °C (No freezing)|
|Relative humidity||35 to 85 % RH (No condensation)|
|Vibration resistance||10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions|
|Weight||Approx. 50 g|
|*1 The above data was obtained using an aluminium target (A5052 t=1 mm). When measuring steel or stainless steel targets, refer to the characteristics of linearity for these materials.
*2 The above data was obtained using an aluminum target A5052 t=1 mm 0.04″ . When measuring steel or stainless steel targets, refer to the characteristics of linearity for these materials.
*3 NPN output can easily be converted to PNP output by connecting the optional OP-5148 PNP Output Converter.
*4 When the distance between the sensor head and the target is 50% of the measuring range and the operating temperature is 10 to +40°C (EX-008) or 0 to +50°C (EX-016 and EX-022).
Датчик измерения Keyence EX-008
Категория: Датчики измерения