Model	CV-5001
Type	Controller
No. of pixels	• 512 (H) ? 480 (V), Approx 240,000 pixels • 640 (H) ? 480 (V), Approx 310,000 pixels
Camera input	Two colour/monochrome cameras (CV-035C/ S035C/H035C/035M/ S035M/H035M can be connected. Mixed connection is possible.)
Main processor for image processing	DSP
No. of registered settings	SD cards 1 and 2 can each hold 1000 programs (depending on the size of the SD card and the size of the programs), external switching possible
Number of screens that can be registered	Maximum 1000 screens for each program (depending on SD card size), Compressed saves possible
Internal memory capacity	SD card slot x2 (SDHC compatible) Compatible with OP-87133 (512 MB: standard in SD1 slot for CV-5501/5001), CA-SD1G (1GB: standard in SD1 slot for CV-5701), CA-SD4G (4GB: SDHC)
Window settings	Measurement area	128 locations per program
Mask area	4 locations per area
Colour extraction function (valid only when a colour camera is connected)	Colour binary, colour shade, Gray, RGB average gray (Colours can be specified numerically via HSV values) Compatible with 1:n copy
Measurement tool	Area measurement	The shapes are rectangle, rotated rectangle, circle, oval, ring, arc or polygon (up to 12 sides), edge detection rectangle area or edge detection circular area
Position detection	Pattern search	• Multiple searches possible for both pattern area and search area. The shapes are rectangle, rotated rectangle, circle, oval, ring, arc, and polygon (up to 12 sides) • Pattern area can be masked (4 positions / area)
V-search	• Up to 256 patterns can be searched simultaneously for both pattern area and search area. The shapes are rectangle, rotated rectangle, circle, oval, ring, arc, and polygon (up to 12 sides) • Pattern area can be masked (4 positions / area)
ShapeTrax2	• Multiple searches possible for both pattern area and search area. The shapes are rectangle, rotated rectangle, circle, oval, ring, arc, and polygon (up to 12 sides) • Pattern area can be masked (4 positions / area)
Edge position	• Angles can be measured. The shapes are rectangle, rotated rectangle, circle, oval, ring, arc or polygon (up to 12 sides), edge detection rectangle area or edge detection circular area
Trend edge position	• Circle or straight line can be measured from the detection results • Shapes are rectangle, rotated rectangle, ring and arc
Blob (Centre of gravity)	The shapes are rectangle, rotated rectangle, circle, oval, ring, arc or polygon (up to 12 sides), edge detection rectangle area or edge detection circular area
Inspection mode	Edge position
Edge pitch
Edge count	The shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to 12 sides), auto-adjusting rectangle or auto-adjusting circular area
Edge angle	Shape is rectangle.
Pair edge	The shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to 12 sides), auto-adjusting rectangle or auto-adjusting circular area
Trend edge width	Shapes are rectangle, rotated rectangle, ring and arc
Blob (characteristic quantities)	• Labels, center of gravity, main axis angle, area, feret diameter, perimeter, roundness • The shapes are rectangle, rotated rectangle, circle, oval, ring, arc or polygon (up to 12 sides), edge detection rectangle area or edge detection circular area
Stain detection	• Subtract stain detection by using subtract filter • Stain grouping function supports multiple stain detection and position measurement • The shapes are rectangle, rotated rectangle, circle, oval, ring, arc or polygon (up to 12 sides), edge detection rectangle area or edge detection circular area • Supports measurement of the colour image using fine colour
Trend edge flaw	• The shapes are rectangle, circle, oval, ring, arc, and polygon. • Supports flaw detection using straight lines, circles, ovals, and free-form straight lines as reference models.
Intensity inspection	The shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to 12 sides), auto-adjusting rectangle or auto-adjusting circular area
Colour (only when a Colour camera is connected)	• RGB and HSB measurement supported • The shapes are rectangle, rotated rectangle, circle, oval, ring, arc or polygon (up to 12 sides)
Geometry	• Calculation result can be reflected • Shapes are point, line, and circle
OCR	• Character recognition for max. 2 lines of 20 characters per line • Shape is rectangle • Built-in date/time encryption support function
Interface	Control input	External trigger input	2 points EV compatible input rating: 26.4 V or less, 3 mA or more 2-camera simultaneous capture/individual capture can be selected. Individual trigger delay (0 to 999 ms) can be selected for each trigger input
Control input	18 inputs Input rating 26.4 V or less, 2 mA or more
Control output	Universal output	27 outputs NPN (including two FLASH outputs linked to external trigger.)
Total comparator output	1 output, NPN open collector, maximum 50 mA (30 V or less) Supports total status hold control and one shot output (1 to 9999 ms)
Monitor output	SVGA 800×600 (24-bit colour 60 Hz)
Run indicator	Power, Error LED display
RS-232C	Numerical value output, image data (compressible) and control input/output enabled. Can be used simultaneously with other communication ports. Maximum baud rate of 115200 bps is supported. Do not use to connect to PLC link, CC-Link, or EtherNet/IPTM
Ethernet	Numerical value output, image data (compressible) and control input/output enabled. Can be used simultaneously with other communication ports. 100BASE-TX/10BASE-T
USB	Numerical value output, image data (compressible) and control input/output enabled. Can be used simultaneously with other communication ports USB2.0 HI-SPEED compatible
PLC link	Numerical value output and control input/output using the RS-232C port or Ethernet port enabled. Following PLCs are supported via link unit*1: • KEYKENCE CORP.: KV-700 series, KV-1000 series, KV-3000 series, KV-5000 series, KV-5500 series • Mitsubishi Electric: A series (RS-232C only), Q series, L series • OMRON: SYSMAC C series (RS-232C only), CJ/CJ1 series • Yaskawa Electric: MP900 series (RS-232C only)/MP2000 series Do not use to connect to CC-Link, RS-232C, or EtherNet/IPTM
CC-Link	By connecting the optional CC-Link unit CA-NCL10E, numerical value input/ output and control input/output are enabled. • Supports remote device station, Ver. 2.00/1.10 • Do not use to connect to PLC link, RS-232C, or EtherNet/IPTM
EtherNet/IPTM	Numerical value input/output and control input/output enabled while using an Ethernet port • Supports periodic communication (Max. 1436 bytes), supports message communication • Up to 128 units can be connected • Compliant with compliance test Version.A5 • Do not use to connect to PLC link, RS-232C, or CC-Link
Illumination control	By connecting the optional illumination expansion unit, LED illumination (12 V, 24 V) and intensity control are enabled. • 2 channels per unit, connect up to 4 units • Supports multi-pattern illumination function
Continuous capture function	• 1 to 32-time multi-measurement (maximum, minimum and average values) • Error values can be excluded from the measurement result
Execution condition setting function	Can set whether to execute the results (OK/NG) for other measurement and calculation windows in each measurement window.
Image capturing setting function	Processing area setting function	240,000 pixels (512 (H) x 480 (V)) or 310,000 pixels (640 (H) x 480 (V)) of the 320,000 pixels are used for the process area. However, when CV-H035C/H035M is connected, support is only provided for 240,000 pixels of the 310,000 pixels used for the process area.
Scan mode (valid only when a monochrome camera is connected)	Progressive/interlace selectable
Capturing start/end line setting function	Desired capture start/end line can be set within the image capture range. CV-H200C/H200M cannot capture fewer than 100 lines.
Correction functions	Position adjustment	Batch, individual (maximum 128 settings), X, Y, ±180° rotation.
Camera gain adjustment	Sensitivity adjustment, offset, and span adjustment (RGB batch/individual and span can be set for each of 16 brightness levels. RGB individual setting can be supported when colour camera is connected.)
White balance adjustment (valid only when a colour camera is connected)	Manual setting using white paper
Image inversion function	Can generate mirror images
Scaling function	X and Y calibration setting for each camera. Conversion from measurement values and calculation values is supported.
Filter function	Count	The same type of filter can be used up to 9 times. 13 steps. (For binarization and subtract only: 1 step/window)
Type	Expand, shrink, average, median, edge sharpening, edge extract X, edge extract Y, Sobel, Prewitt, Roberts, Laplacian, binary, subtract, illumination adjustment, contrast conversion, image extraction, image shade correction, blur
Display language	Japanese/English/German/Italian/French/Traditional Chinese/Simplified Chinese selectable
Calculation function	Numerical operation	No. of settings	128 calculations/1 program
Arithmetic operation	+, -, x, ?
Arithmetic function	Square, exponential, counting fractions as one, round-off fractions, maximum, minimum, average, average within range, square root, absolute value, remainder, distance, angle, sin, cos, tan, asin, acos, atan, ?
Comparative operator	<, ==, Not
Geometric calculation	Distance between 2 points, angle of line segment, circle radius, circle center, average angle, straight line, cross point, distance between a point and a straight line, straight line angle, angle between the two crossed lines, perpendicular line between a point to a line, perpendicular bisector, midpoint
Coordinate conversion function.	Coordinate system conversion, rotating matrix
Type conversion function	Coordinate constant conversion, constant coordinate conversion, angle unit conversion
Logical operator	AND, OR, NOT, XOR
Sort function	Maximum value index output, minimum value index output
System function	Number of measurement times, measurement time, year, month, day, time, minute, second
Time axis operation function	Previous measurement result acquisition operator
Command memory	1000 command memories that can be rewritten from external devices or the remote control console during operation are installed.
Support functions	Statistics analysis	No. of data	Max. 20000 data (can be saved into an SD card in a batch)
Statistical items	Maximum, minimum, average value, deviation (3?), total status OK/NG times
Screen save (valid when monochrome and colour cameras are connected)	The following number of screens can be saved in the system’s memory: • Maximum 511 images (monochrome camera) • Maximum 255 images (monochrome camera in 310,000 pixel mode) • Maximum 508 images (colour camera) • Maximum 253 images (colour camera in 310,000 pixel mode) (These are the maximum values with only one camera connected, and [Condition] set to [All Images].)
Programming aid functions	Image Zoom	Between 4% and 1600% during setting or operation (6% and 2500% during full screen display) (Size can be set for each screen while displaying multiple screens.)
Edge derivative wave display	Edge waveform can be graphically displayed during setting or operation, and edge intensity and measurement values (some are not supported) can be displayed during setting.
Profile display	Trend edge position and gap can be graphically displayed during setting or operation.
Stability display	Stain detection (stain level) is displayed during setting or operation.
Cutout projection waveform display	OCR automatic cutout waveform graphics can be displayed during setting or operation
Shift all windows	Selected windows from an identical camera or an identical registered image can be shifted in the desired XY direction in a group.
Flaw level waveform	The flaw level waveform of the trend edge tool can be displayed as a graphic in Program or Run mode.
Display template setting function	No. of display templates	10 templates/1 program (within which 4 templates are specified values), externally selectable
No. of screens that can be displayed simultaneously	Max. 5 screens can be displayed at the same time (when 5 scr. (HORIZONTAL)/5 scr. (VERTICAL) is selected).
Hold image	Up to the past three images (NG images) can be displayed as hold images. Measurement results and measurement time can be viewed. (The number of displayable times varies between 0 and 3 depending on camera’s connection state
Screen customisation function	No. of customised screens	10 screens/1 program
Custom item	Character string: Measurement value (decimal point can be specified), result, custom character, graphics, active text
Measurement result interlink	• Display colour can be changed according to the result for figures and custom characters. • Can set a message in the allocation table that relates to the measurement value (active text)
Operation rewrite function	• Upper/lower tolerance or command memory can be rewritten during operation. • Supports illumination adjustment during operation (when CA-DC21E is connected)
Emulation function	Built-in emulation function that can create new program data and save data on CV-5001SE in the FE format for the CV-3001 Series SE, SEII, and SEIII, and the CV-5001 Series.
Program file update function	The program data used on the CV-3001 Series or CV-5001FE can be converted into the program data format for the CV-5001 Series second edition.
Custom menu function	Shortcut menu to a desired program screen can be created (20 menus/program).
Memory card save function (SD2 slot only)	• Measurement value, judgment result, NG count, measurement image (compressible), stored image (compressible), captured image, statistics analysis data, RS-232C communication log, program data (only setting content can be saved to both SD1 slot and SD2 slot) • Can save data during test run (except for program data)
Others	Screen capture function, password function, re-test function, file management function, I/O monitoring, RS-232C monitoring (with log save function)
Rating	Power voltage	24 VDC ±10 %
Current consumption	2.2 A (2 cameras at maximum load)
Environmental resistance	Ambient temperature	0 to +50 °C
Relative humidity	35 to 85 % RH (No condensation)
Weight	Approx. 1,250 g
*1 Some models also are compatible with the RS-232C, Ethernet ports in the system.

Previous product

Датчик идентификации Keyence CA-SD16G

Next product

Датчик идентификации Keyence CV-5502P

Датчик идентификации Keyence CV-5001

Digital Image Sensor/Controller

Описание
Получить КП

Описание

Model	CV-5001
Type	Controller
No. of pixels	• 512 (H) ? 480 (V), Approx 240,000 pixels • 640 (H) ? 480 (V), Approx 310,000 pixels
Camera input	Two colour/monochrome cameras (CV-035C/ S035C/H035C/035M/ S035M/H035M can be connected. Mixed connection is possible.)
Main processor for image processing	DSP
No. of registered settings	SD cards 1 and 2 can each hold 1000 programs (depending on the size of the SD card and the size of the programs), external switching possible
Number of screens that can be registered	Maximum 1000 screens for each program (depending on SD card size), Compressed saves possible
Internal memory capacity	SD card slot x2 (SDHC compatible) Compatible with OP-87133 (512 MB: standard in SD1 slot for CV-5501/5001), CA-SD1G (1GB: standard in SD1 slot for CV-5701), CA-SD4G (4GB: SDHC)
Window settings	Measurement area	128 locations per program
Mask area	4 locations per area
Colour extraction function (valid only when a colour camera is connected)	Colour binary, colour shade, Gray, RGB average gray (Colours can be specified numerically via HSV values) Compatible with 1:n copy
Measurement tool	Area measurement	The shapes are rectangle, rotated rectangle, circle, oval, ring, arc or polygon (up to 12 sides), edge detection rectangle area or edge detection circular area
Position detection	Pattern search	• Multiple searches possible for both pattern area and search area. The shapes are rectangle, rotated rectangle, circle, oval, ring, arc, and polygon (up to 12 sides) • Pattern area can be masked (4 positions / area)
V-search	• Up to 256 patterns can be searched simultaneously for both pattern area and search area. The shapes are rectangle, rotated rectangle, circle, oval, ring, arc, and polygon (up to 12 sides) • Pattern area can be masked (4 positions / area)
ShapeTrax2	• Multiple searches possible for both pattern area and search area. The shapes are rectangle, rotated rectangle, circle, oval, ring, arc, and polygon (up to 12 sides) • Pattern area can be masked (4 positions / area)
Edge position	• Angles can be measured. The shapes are rectangle, rotated rectangle, circle, oval, ring, arc or polygon (up to 12 sides), edge detection rectangle area or edge detection circular area
Trend edge position	• Circle or straight line can be measured from the detection results • Shapes are rectangle, rotated rectangle, ring and arc
Blob (Centre of gravity)	The shapes are rectangle, rotated rectangle, circle, oval, ring, arc or polygon (up to 12 sides), edge detection rectangle area or edge detection circular area
Inspection mode	Edge position
Edge pitch
Edge count	The shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to 12 sides), auto-adjusting rectangle or auto-adjusting circular area
Edge angle	Shape is rectangle.
Pair edge	The shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to 12 sides), auto-adjusting rectangle or auto-adjusting circular area
Trend edge width	Shapes are rectangle, rotated rectangle, ring and arc
Blob (characteristic quantities)	• Labels, center of gravity, main axis angle, area, feret diameter, perimeter, roundness • The shapes are rectangle, rotated rectangle, circle, oval, ring, arc or polygon (up to 12 sides), edge detection rectangle area or edge detection circular area
Stain detection	• Subtract stain detection by using subtract filter • Stain grouping function supports multiple stain detection and position measurement • The shapes are rectangle, rotated rectangle, circle, oval, ring, arc or polygon (up to 12 sides), edge detection rectangle area or edge detection circular area • Supports measurement of the colour image using fine colour
Trend edge flaw	• The shapes are rectangle, circle, oval, ring, arc, and polygon. • Supports flaw detection using straight lines, circles, ovals, and free-form straight lines as reference models.
Intensity inspection	The shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to 12 sides), auto-adjusting rectangle or auto-adjusting circular area
Colour (only when a Colour camera is connected)	• RGB and HSB measurement supported • The shapes are rectangle, rotated rectangle, circle, oval, ring, arc or polygon (up to 12 sides)
Geometry	• Calculation result can be reflected • Shapes are point, line, and circle
OCR	• Character recognition for max. 2 lines of 20 characters per line • Shape is rectangle • Built-in date/time encryption support function
Interface	Control input	External trigger input	2 points EV compatible input rating: 26.4 V or less, 3 mA or more 2-camera simultaneous capture/individual capture can be selected. Individual trigger delay (0 to 999 ms) can be selected for each trigger input
Control input	18 inputs Input rating 26.4 V or less, 2 mA or more
Control output	Universal output	27 outputs NPN (including two FLASH outputs linked to external trigger.)
Total comparator output	1 output, NPN open collector, maximum 50 mA (30 V or less) Supports total status hold control and one shot output (1 to 9999 ms)
Monitor output	SVGA 800×600 (24-bit colour 60 Hz)
Run indicator	Power, Error LED display
RS-232C	Numerical value output, image data (compressible) and control input/output enabled. Can be used simultaneously with other communication ports. Maximum baud rate of 115200 bps is supported. Do not use to connect to PLC link, CC-Link, or EtherNet/IPTM
Ethernet	Numerical value output, image data (compressible) and control input/output enabled. Can be used simultaneously with other communication ports. 100BASE-TX/10BASE-T
USB	Numerical value output, image data (compressible) and control input/output enabled. Can be used simultaneously with other communication ports USB2.0 HI-SPEED compatible
PLC link	Numerical value output and control input/output using the RS-232C port or Ethernet port enabled. Following PLCs are supported via link unit*1: • KEYKENCE CORP.: KV-700 series, KV-1000 series, KV-3000 series, KV-5000 series, KV-5500 series • Mitsubishi Electric: A series (RS-232C only), Q series, L series • OMRON: SYSMAC C series (RS-232C only), CJ/CJ1 series • Yaskawa Electric: MP900 series (RS-232C only)/MP2000 series Do not use to connect to CC-Link, RS-232C, or EtherNet/IPTM
CC-Link	By connecting the optional CC-Link unit CA-NCL10E, numerical value input/ output and control input/output are enabled. • Supports remote device station, Ver. 2.00/1.10 • Do not use to connect to PLC link, RS-232C, or EtherNet/IPTM
EtherNet/IPTM	Numerical value input/output and control input/output enabled while using an Ethernet port • Supports periodic communication (Max. 1436 bytes), supports message communication • Up to 128 units can be connected • Compliant with compliance test Version.A5 • Do not use to connect to PLC link, RS-232C, or CC-Link
Illumination control	By connecting the optional illumination expansion unit, LED illumination (12 V, 24 V) and intensity control are enabled. • 2 channels per unit, connect up to 4 units • Supports multi-pattern illumination function
Continuous capture function	• 1 to 32-time multi-measurement (maximum, minimum and average values) • Error values can be excluded from the measurement result
Execution condition setting function	Can set whether to execute the results (OK/NG) for other measurement and calculation windows in each measurement window.
Image capturing setting function	Processing area setting function	240,000 pixels (512 (H) x 480 (V)) or 310,000 pixels (640 (H) x 480 (V)) of the 320,000 pixels are used for the process area. However, when CV-H035C/H035M is connected, support is only provided for 240,000 pixels of the 310,000 pixels used for the process area.
Scan mode (valid only when a monochrome camera is connected)	Progressive/interlace selectable
Capturing start/end line setting function	Desired capture start/end line can be set within the image capture range. CV-H200C/H200M cannot capture fewer than 100 lines.
Correction functions	Position adjustment	Batch, individual (maximum 128 settings), X, Y, ±180° rotation.
Camera gain adjustment	Sensitivity adjustment, offset, and span adjustment (RGB batch/individual and span can be set for each of 16 brightness levels. RGB individual setting can be supported when colour camera is connected.)
White balance adjustment (valid only when a colour camera is connected)	Manual setting using white paper
Image inversion function	Can generate mirror images
Scaling function	X and Y calibration setting for each camera. Conversion from measurement values and calculation values is supported.
Filter function	Count	The same type of filter can be used up to 9 times. 13 steps. (For binarization and subtract only: 1 step/window)
Type	Expand, shrink, average, median, edge sharpening, edge extract X, edge extract Y, Sobel, Prewitt, Roberts, Laplacian, binary, subtract, illumination adjustment, contrast conversion, image extraction, image shade correction, blur
Display language	Japanese/English/German/Italian/French/Traditional Chinese/Simplified Chinese selectable
Calculation function	Numerical operation	No. of settings	128 calculations/1 program
Arithmetic operation	+, -, x, ?
Arithmetic function	Square, exponential, counting fractions as one, round-off fractions, maximum, minimum, average, average within range, square root, absolute value, remainder, distance, angle, sin, cos, tan, asin, acos, atan, ?
Comparative operator	<, ==, Not
Geometric calculation	Distance between 2 points, angle of line segment, circle radius, circle center, average angle, straight line, cross point, distance between a point and a straight line, straight line angle, angle between the two crossed lines, perpendicular line between a point to a line, perpendicular bisector, midpoint
Coordinate conversion function.	Coordinate system conversion, rotating matrix
Type conversion function	Coordinate constant conversion, constant coordinate conversion, angle unit conversion
Logical operator	AND, OR, NOT, XOR
Sort function	Maximum value index output, minimum value index output
System function	Number of measurement times, measurement time, year, month, day, time, minute, second
Time axis operation function	Previous measurement result acquisition operator
Command memory	1000 command memories that can be rewritten from external devices or the remote control console during operation are installed.
Support functions	Statistics analysis	No. of data	Max. 20000 data (can be saved into an SD card in a batch)
Statistical items	Maximum, minimum, average value, deviation (3?), total status OK/NG times
Screen save (valid when monochrome and colour cameras are connected)	The following number of screens can be saved in the system’s memory: • Maximum 511 images (monochrome camera) • Maximum 255 images (monochrome camera in 310,000 pixel mode) • Maximum 508 images (colour camera) • Maximum 253 images (colour camera in 310,000 pixel mode) (These are the maximum values with only one camera connected, and [Condition] set to [All Images].)
Programming aid functions	Image Zoom	Between 4% and 1600% during setting or operation (6% and 2500% during full screen display) (Size can be set for each screen while displaying multiple screens.)
Edge derivative wave display	Edge waveform can be graphically displayed during setting or operation, and edge intensity and measurement values (some are not supported) can be displayed during setting.
Profile display	Trend edge position and gap can be graphically displayed during setting or operation.
Stability display	Stain detection (stain level) is displayed during setting or operation.
Cutout projection waveform display	OCR automatic cutout waveform graphics can be displayed during setting or operation
Shift all windows	Selected windows from an identical camera or an identical registered image can be shifted in the desired XY direction in a group.
Flaw level waveform	The flaw level waveform of the trend edge tool can be displayed as a graphic in Program or Run mode.
Display template setting function	No. of display templates	10 templates/1 program (within which 4 templates are specified values), externally selectable
No. of screens that can be displayed simultaneously	Max. 5 screens can be displayed at the same time (when 5 scr. (HORIZONTAL)/5 scr. (VERTICAL) is selected).
Hold image	Up to the past three images (NG images) can be displayed as hold images. Measurement results and measurement time can be viewed. (The number of displayable times varies between 0 and 3 depending on camera’s connection state
Screen customisation function	No. of customised screens	10 screens/1 program
Custom item	Character string: Measurement value (decimal point can be specified), result, custom character, graphics, active text
Measurement result interlink	• Display colour can be changed according to the result for figures and custom characters. • Can set a message in the allocation table that relates to the measurement value (active text)
Operation rewrite function	• Upper/lower tolerance or command memory can be rewritten during operation. • Supports illumination adjustment during operation (when CA-DC21E is connected)
Emulation function	Built-in emulation function that can create new program data and save data on CV-5001SE in the FE format for the CV-3001 Series SE, SEII, and SEIII, and the CV-5001 Series.
Program file update function	The program data used on the CV-3001 Series or CV-5001FE can be converted into the program data format for the CV-5001 Series second edition.
Custom menu function	Shortcut menu to a desired program screen can be created (20 menus/program).
Memory card save function (SD2 slot only)	• Measurement value, judgment result, NG count, measurement image (compressible), stored image (compressible), captured image, statistics analysis data, RS-232C communication log, program data (only setting content can be saved to both SD1 slot and SD2 slot) • Can save data during test run (except for program data)
Others	Screen capture function, password function, re-test function, file management function, I/O monitoring, RS-232C monitoring (with log save function)
Rating	Power voltage	24 VDC ±10 %
Current consumption	2.2 A (2 cameras at maximum load)
Environmental resistance	Ambient temperature	0 to +50 °C
Relative humidity	35 to 85 % RH (No condensation)
Weight	Approx. 1,250 g
*1 Some models also are compatible with the RS-232C, Ethernet ports in the system.

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-sensors.ru с указанием требуемых позиций и реквизитами компании.

Категория: Датчики идентификации

Датчик идентификации Keyence CV-5001

Датчик идентификации Keyence NX-C03R

Датчик идентификации Keyence OP-87533

Датчик идентификации Keyence BL-180SO(7030)

Датчик идентификации Keyence NX-C08R

Датчик идентификации Keyence OP-77467

Датчик идентификации Keyence N-R2

Датчик идентификации Keyence N-L20

Датчик идентификации Keyence OP-77470

Датчик идентификации Keyence CV-5001

Похожие товары