| Model | BL-1370 | ||
| Type | Long-range | ||
| Type | Reading direction | Front | |
| Scanning method | Single | ||
| Laser | Light source | Visible red semiconductor laser (660 nm wavelength) | |
| Control output | 85 µW | ||
| Pulse duration | 112 µs | ||
| Laser class | Class 2 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10*1) | ||
| Reading | Supported codes | CODE 39, ITF, Industrial 2of5, Standard 2of5, COOP 2of5, NW-7 (Codabar), CODE 128, GS1-128, CODE 93, EAN/UPC, GS1 DataBar | |
| Number of readable digits | 74 digits (148 digits with CODE 128 start character C) | ||
| Readable bar width | 0.15 mm to | ||
| Reading distance | 160 to 600 mm*2 (1.0 mm narrow bar width) | ||
| Focal point | 230 mm | ||
| Largest readable label width | 404 mm*2 (420 mm distance, 1.0 mm narrow bar width) | ||
| PCS | 0.4 or more | ||
| Scanning rate | 500 to 1,300 scans/second | ||
| I/O specifications | Input terminals | Number of inputs | Two (IN1, IN2) |
| Input format | non-voltage input (contact or solid-state) | ||
| Output terminals | Number of outputs | Four (OUT1 through OUT4) | |
| Output | NPN open collector | ||
| Rated load | 24 VDC, 30 mA | ||
| Leakage current (at OFF) | 0.1 mA or less | ||
| Residual voltage (at ON) | 0.5 V or less | ||
| Serial interface | Communication method | Conforms to EIA, RS-232C | |
| Communication speed | 600, 1,200, 2,400, 4,800, 9,600, 19,200, 31,250, 38,400, 57,600, 115,200 bps | ||
| Synchronisation between the transmitter and receiver | Asynchronous | ||
| Data bit length | 7/8 bits | ||
| Stop bit length | 1/2 bits | ||
| Parity check | None/Even/Odd | ||
| Rating | Power voltage | 5 VDC ±5 % | |
| Voltage consumption | 400 mA or less | ||
| Environmental resistance | Enclosure rating | IP65 | |
| Ambient light | 10,000 lux (sunlight), 6,000 lux (Incandescent lamp) | ||
| Operating environment | No dust or corrosive gas present | ||
| Ambient temperature | 0 to +45 °C | ||
| Storage temperature | -20 to +60 °C | ||
| Relative humidity | 35 to 85 % RH (No condensation) | ||
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | ||
| Weight | Approx. 115 g | ||
| *1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. *2 Specifications for 500-scan/second operation Use the Limited Power Source defined in UL/IEC60950-1 to comply with UL/IEC60950-1. Internal body settings are written in the internal memory area (can be rewritten 100,000 times). |
Датчик идентификации Keyence BL-1370
Ultra Small Digital Barcode Reader, Long-distance Type, Front Single
Описание
Получить КП
Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-sensors.ru с указанием требуемых позиций и реквизитами компании.
Похожие товары
Закрыть
Датчик идентификации Keyence OP-77468
Replacement Cable for BL-N70R
Закрыть
Датчик идентификации Keyence SR-H5W
Setup software
Закрыть
Датчик идентификации Keyence N-L20
Communication unit Ethernet connection type
Закрыть
Датчик идентификации Keyence N-UB
Dedicated Communication Unit, USB Type
Закрыть
Датчик идентификации Keyence OP-87533
D-sub 9 pin cross connector
Закрыть
Датчик идентификации Keyence NX-C08R
Advanced RFID System Extension Cable 8 m
Закрыть
Датчик идентификации Keyence BL-1301
Ultra Small Digital Barcode Reader, Standard Type, Front Raster
Закрыть
Датчик идентификации Keyence NX-C03R
Advanced RFID System Extension Cable 3 m