Model	SL-V119F
Detection capability	o14 mm
Beam axis spacing/Lens diameter	10 mm/o4 mm
Effective aperture angle	Max. ±2.5 ° (When operating distance is 3 m or more)
Working distance	0.1 m to 7.0 m
Response time (ms)	ON>OFF	22.3*1
OFF>ON	62.3*1
Light source	Infrared LED (850 nm)
Operation mode	Turns on when no interruptions are present in the detection zone (excluding when the muting function is used)
OSSD output	Output	2 outputs each for PNP and NPN. Can be changed by using the connector cable.
Max. l oad current	500 mA*2
Residual vol tage (during ON)	Max. 2.5 V (with a cable length of 7 m)
Leakage current	Max. 100 µA*3
Max. capacitive load	2.2 µF (with a load resistance of 100 ?)
Load wiring resistance	Max. 2.5 ?*4
Non safety-rel atedoutput	AUX	Output with automatic PNP/NPN switching function, 50 mA max.
Interlock-reset-ready output
Alarm output
Clear/blocked output
State information output 1, 2
Muting lamp output	Incandescent lamp (24 VDC, 1 to 7 W) or LED lamp (load current: 10 to 300 mA)*5 can be connected
Input	EDM input	Short-circuit current 10 mA
Wait input	Short-circuit current 2.5 mA
Reset input
Muting input 1, 2
Override input
Protection circuit	Reverse current protection, short-circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1
EMI	EN55011 Class A, FCC Part15B Class A
Safety	IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, UL61496-2, EN61496-2 (Type 4 AOPD) IEC61508 (SIL3), EN61508 (SIL3), IEC62061 (SIL3), EN ISO13849-1: 2015 (Category 4, PLe) UL508 UL1998
Rating	Power voltage	24 VDC +10 %, -20 %, Ripple (P-P) 10 % or less
Current consumption (mA)	When the Centre indicator is ON	Transmitter	166*6
Receiver	106*6
When the Centre indicator is OFF	Transmitter	156*6
Receiver	93*6
Environmental resistance	Enclosure rating	IP65 (IEC60529)
Overvoltage category	II
Ambient light	Incandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.
Operating ambient temperature	-10 to +55 °C (No freezing)
Storage temperature	-25 to +60 °C (No freezing)
Operating relative humidity	15 to 85 % RH (No condensation)
Storage relative humidity	15 to 95 % RH
Vibration resistance	10 to 55 Hz, Double amplitude 0.7 mm, 20 sweeps in each of the X, Y, and Z directions
Shock resistance	100 m/s2 (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case	Aluminium
Upper case/lower case	Zinc die-cast
Front cover	Polycarbonate, SUS304
Weight	Transmitter	850 g
Receiver	855 g
1 When connecting the SL-V units in series, the response time (ON to OFF) is the sum of theresponse times of al l the individual SL-V units, but the response time (OFF to ON) is the sameas that of a singl e SL-V unit. e.g. When connecting the SL-V32H (32 beam axes), SL-V24H (24 beam axes), andSL-V12L (12 beam axes) in series, the response time of each unit is 10.3 ms, 9.2 ms, and 7.6ms respectively, and the response time (ON to OFF) is 10.3 ms + 9.2 ms + 7.6 ms = 27.1 ms. 2 When used under ambient temperature between 45 to 55 °C, the maximum should not exceed 300 mA. 3 Applies to situations when power is either off or disconnected. 4 The wiring resistance between the OSSD output and the connected equipment (excluding the resistance of the cable) must be 2.5 ? or less to ensure operations. If using the NPN output with a cable length of 15 m or longer, and the load current consumption is 200 mA or more, the wire resistance must be 1.0 ? or less. 5 When used under ambient temperature between 45 to 55 °C, use incandescent lamps (24 VDC, 1 to 3 W) or LED lamps (load current: 10 to 100 mA). 6 The current consumption of the transmitter increases by 10 mA and decreases on the receiver by 10 mA when the AUX output (red wire of the transmitter) and the EDM input (red wire of the receiver) are short circuited if the fol lowing additional condition is met. (The total consumption of both transmitter and receiver is fixed.) In the case where the PNP output type cabl e is used, the condition is that OSSD stays in the OFF state. In the case where the NPN output type cable is used, the condition is that OSSD stays in the ON state.

Previous product

Датчик безопасности Keyence SL-V119FM

Next product

Датчик безопасности Keyence SL-V120H

Датчик безопасности Keyence SL-V119F

Main Unit, General-purpose Type, 119 Optical Axes

Описание
Получить КП

Описание

Model	SL-V119F
Detection capability	o14 mm
Beam axis spacing/Lens diameter	10 mm/o4 mm
Effective aperture angle	Max. ±2.5 ° (When operating distance is 3 m or more)
Working distance	0.1 m to 7.0 m
Response time (ms)	ON>OFF	22.3*1
OFF>ON	62.3*1
Light source	Infrared LED (850 nm)
Operation mode	Turns on when no interruptions are present in the detection zone (excluding when the muting function is used)
OSSD output	Output	2 outputs each for PNP and NPN. Can be changed by using the connector cable.
Max. l oad current	500 mA*2
Residual vol tage (during ON)	Max. 2.5 V (with a cable length of 7 m)
Leakage current	Max. 100 µA*3
Max. capacitive load	2.2 µF (with a load resistance of 100 ?)
Load wiring resistance	Max. 2.5 ?*4
Non safety-rel atedoutput	AUX	Output with automatic PNP/NPN switching function, 50 mA max.
Interlock-reset-ready output
Alarm output
Clear/blocked output
State information output 1, 2
Muting lamp output	Incandescent lamp (24 VDC, 1 to 7 W) or LED lamp (load current: 10 to 300 mA)*5 can be connected
Input	EDM input	Short-circuit current 10 mA
Wait input	Short-circuit current 2.5 mA
Reset input
Muting input 1, 2
Override input
Protection circuit	Reverse current protection, short-circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1
EMI	EN55011 Class A, FCC Part15B Class A
Safety	IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, UL61496-2, EN61496-2 (Type 4 AOPD) IEC61508 (SIL3), EN61508 (SIL3), IEC62061 (SIL3), EN ISO13849-1: 2015 (Category 4, PLe) UL508 UL1998
Rating	Power voltage	24 VDC +10 %, -20 %, Ripple (P-P) 10 % or less
Current consumption (mA)	When the Centre indicator is ON	Transmitter	166*6
Receiver	106*6
When the Centre indicator is OFF	Transmitter	156*6
Receiver	93*6
Environmental resistance	Enclosure rating	IP65 (IEC60529)
Overvoltage category	II
Ambient light	Incandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.
Operating ambient temperature	-10 to +55 °C (No freezing)
Storage temperature	-25 to +60 °C (No freezing)
Operating relative humidity	15 to 85 % RH (No condensation)
Storage relative humidity	15 to 95 % RH
Vibration resistance	10 to 55 Hz, Double amplitude 0.7 mm, 20 sweeps in each of the X, Y, and Z directions
Shock resistance	100 m/s2 (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case	Aluminium
Upper case/lower case	Zinc die-cast
Front cover	Polycarbonate, SUS304
Weight	Transmitter	850 g
Receiver	855 g
1 When connecting the SL-V units in series, the response time (ON to OFF) is the sum of theresponse times of al l the individual SL-V units, but the response time (OFF to ON) is the sameas that of a singl e SL-V unit. e.g. When connecting the SL-V32H (32 beam axes), SL-V24H (24 beam axes), andSL-V12L (12 beam axes) in series, the response time of each unit is 10.3 ms, 9.2 ms, and 7.6ms respectively, and the response time (ON to OFF) is 10.3 ms + 9.2 ms + 7.6 ms = 27.1 ms. 2 When used under ambient temperature between 45 to 55 °C, the maximum should not exceed 300 mA. 3 Applies to situations when power is either off or disconnected. 4 The wiring resistance between the OSSD output and the connected equipment (excluding the resistance of the cable) must be 2.5 ? or less to ensure operations. If using the NPN output with a cable length of 15 m or longer, and the load current consumption is 200 mA or more, the wire resistance must be 1.0 ? or less. 5 When used under ambient temperature between 45 to 55 °C, use incandescent lamps (24 VDC, 1 to 3 W) or LED lamps (load current: 10 to 100 mA). 6 The current consumption of the transmitter increases by 10 mA and decreases on the receiver by 10 mA when the AUX output (red wire of the transmitter) and the EDM input (red wire of the receiver) are short circuited if the fol lowing additional condition is met. (The total consumption of both transmitter and receiver is fixed.) In the case where the PNP output type cabl e is used, the condition is that OSSD stays in the OFF state. In the case where the NPN output type cable is used, the condition is that OSSD stays in the ON state.

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-sensors.ru с указанием требуемых позиций и реквизитами компании.

Категория: Безопасность

Датчик безопасности Keyence SL-V119F

Датчик безопасности Keyence SZ-P5NS

Датчик безопасности Keyence SZ-16V

Датчик безопасности Keyence SZ-P10NM

Датчик безопасности Keyence OP-87121

Датчик безопасности Keyence OP-88087

Датчик безопасности Keyence OP-86938

Датчик безопасности Keyence SZ-P20NS

Датчик безопасности Keyence OP-86941

Датчик безопасности Keyence SL-V119F

Похожие товары